DOWNSTREAM PROCESSES
- Heat and mass transfer in distillation columns
- Pressure drop evaluation
- Mist eliminators
- Process furnaces
- Fluid dynamic analysis of coker and vacuum towers
- Evaluation of inlet feed devices to reduce the liquid entrainment and velocity for improvement of the vapor distribution
- Analysis of spray characteristics and target spray patterns
- Baffles simulation studies establishing criteria for new simulations
- Understanding of risers, regenerators and cyclones for FCC process
- Investigation of flow patterns in horizontal and vertical piping
- Flow rate meters/Flow meters
- Gravitational separators
- Equipment simulation optimization
PIPING MODELLING, STANDARDIZATION AND STRUCTURAL VERIFICATIONS
Development of parametric Finite Element Models for 8 typologies of piping supporting saddles for diameters from ½" to 72" ....
STRESS ANALYSIS OF PIPE BUNDLE HEAT EXCHANGER
Scope of the work was to assess the structural integrity of the heat exchanger E-208A/B in start-up, service and shut-down phases ....
PWDa
The PWDa is a computational tool used mainly for manipulation, simulation and pressure data analysis brought from the well drilling process in petroleum reservoirs ....
SIMCARR
SIMCARR ® is a simulator of hydraulic drilling and cleaning in vertical and inclined wells .....
P-52 ADAPTORS
Although a solution for the specific fatigue calculation was not available directly in ANSYS, ESSS has developed a solution that addressed Technip's needs .....
36"ND AND 20"ND PIPELINES
Fluid-Dynamic and Structural verification of a portion of piping under different conditions (Installation, Hydraulic test, Start Up, Normal Run). Optimization of CupDisk® supports stiffness, in order to minimize stress state on the structure's supports .....
CYCLONE DUST HOPPER INFLUENCE IN THE VORTEX CORE
The influences of the mesh, as well as the presence of a hopper were tested. Pressure drop: both, tetrahedrical and hexahedrical meshes .....
A CFD STUDY COMPARING DIFFERENT FEED NOZZLE ARRANGEMENT WITHIN AN EMPTY SPRAY SECTION IN A COKER FRACTIONATOR
To predict the fluid dynamic behavior in a coker fractionator washing zone and analyze the influence of vapor distribution on the heat and mass transfer efficiency, considering different number of inlet feed nozzles .....
CFD AS A FEATURE TO OPTIMIZE VACUUM TOWERS
A study was performed to verify the refinery vacuum tower feed inlet device modifications, comparing actual configuration to a future proposal. The study was based .....
© All rights reserved | ESSS North America Inc.